Micaceous Iron Oxide is an alkyd-based coating pigmented with micaceous iron oxide. It is recommended for use as a protective coating on steel structures. It may be overcoated with alkyd based finish or left uncoated.

Product Features

• Chemical resistant

• Weather resistant

Specifications

• Paint Type: Solvent based
• Product Type: Interior & Exterior
• Finishing: Low Gloss
• Recommended Substrate: Wood and Metal

Surface Preparation

The surface must be free from millscale, rust, grease, oil and other contaminants; it must be dry at the time of application.

Safety Precautions

• Do not apply when the relative humidity exceeds 85% or when the surface to be coated is less than 3C above the dew point.

• Do not apply at temperature below 7°C. If not, drying and overcoating times will be considerably extended.

• Keep container tightly closed and keep out of reach children or away from food and drink.

• Ensure good ventilation during application and drying.

• During application of paint, naked flames, welding operation, and smoking should not be allowed.

• When applying paint, it is advisable to wear eye protection.

• In case of contact with eye, rinse with plenty of water immediately and seek medical advice.

• Remove splashes from skin by using soap or water.

• Paint must always be stored in a cool place.

• When transporting paint, care must be taken. Always keep container in a secure upright position.

• Dispose off any paint waste in accordance with the appropriate Environment Quality Regulations.