Descriptions

EasySKIM 5000 All Purpose Joint Compound is a ready-to-use skim coat material to smoothen uneven plastering wall, painted surfaces, plaster ceiling joints and gypsum board joints to give a smooth and seamless finishing before apply coating. EasySKIM 5000 All Purpose Joint Compound comes with a special polymer-based formulation with high bonding power that is ideal for jointing, taping, filling and covering the interior gypsum board joints, angles, bead, trim and fastener heads.

Product Features

• Good workability and sanding property

• Ideal for jointing and skimming

• Good compatibility and adhesion with wide range of Nippon Paint interior paints

• Low shrinkage

• Good open time

• Low odour and low VOC

• Complies to ASTM C475

Specifications

• Paint Type: Water based
• Product Type: Interior
• Finishing: Smooth finishing
• Recommended Substrate: Masonry, brick, plastering substrate and fibre board

Application Method

Trowel / Skimming Blade: The joint compound is ready for use after thorough stirring. Application can be by trowel or skimming blade. No dilution required.

Safety Precautions

• Keep container tightly closed and keep out of reach of children or away from food and drink.

• Ensure good ventilation during application and drying.

• When applying joint compound, it is advisable to wear eye protection.

• In case of contact with eye, rinse with plenty of water immediately and seek medical advice.

• Remove splashes from skin by using soap or water.

• Joint compound must always be stored in a cool place.

• When transporting joint compound, care must be taken. Always keep container in a secure upright position.

• Dispose any joint compound waste in accordance with the appropriate Environment Quality Regulations.