9000 Undercoat is an acrylic copolymer-based undercoat with non-added lead and mercury and gives a good build. It provides a sound foundation for 9000 Gloss Finish and Q-Lac Gloss Finish.

Highlights of this product

• Fast Dry

• Good Leveling and Sand-ability

• Good Build

• Suitable on primed metal, woodwork and previously painted surfaces

**Allow sealer/primer to dry for at least 24 hours before applying 9000 Undercoat

Surface Preparation

1.Wood

Surface must be dry and free from dirt, grease and other contaminants. Smoothen surface with sandpaper and then clean off and dry. The scraped areas should be spot-primed using an undercoat for wood surfaces.

2.Metal

Surface must be dry and free from dirt, grease and other contaminants. Ferrous substrate should be sanded or wire-brushed to remove millscales and rust. Clean off dust and dry. The scraped areas should be spot-primed using a primer for metal.

Safety Precautions

• Keep container tightly closed and keep out of reach children or away from food and drink.

• Ensure good ventilation during application and drying.

• When applying paint, it is advisable to wear eye protection.

• In case of contact with eye, rinse with plenty of water immediately and seek medical advice.

• Remove splashes from skin by using soap or water.

• Paint must always be stored in a cool place.

• When transporting paint, care must be taken. Always keep container in a secure upright position.

• Dispose any paint waste in accordance with the appropriate Environment Quality Regulations.